Published by Todd Bush on January 17, 2024
Dr. Ben Emerson describes his research focus on decarbonization at the Ben T. Zinn Combustion Laboratory
SANTA CLARITA, Calif, Jan. 16, 2024 (GLOBE NEWSWIRE) -- NewHydrogen, Inc. (OTCMKTS:NEWH), the developer of ThermoLoop™, a breakthrough technology that uses water and heat rather than electricity to produce the world’s cheapest green hydrogen, today announced that in a recent podcast the Company’s CEO Steve Hill spoke with Dr. Ben Emerson, a principal research engineer at the Ben T. Zinn Combustion Laboratory at the Georgia Institute of Technology.
>> RELATED:
During the conversation, Dr. Emerson explained the concept of combustion and shared his research focus on decarbonization. They discussed the role of hydrogen in the space industry and its potential in the aviation industry, despite its challenges such as energy density and volume. They also addressed the difficulties of storing and burning hydrogen in gas turbines, acknowledging the need for careful control to avoid pollutants like oxides of nitrogen.
Dr. Emerson spoke on the role of hydrogen in the space industry, highlighting its use in rocket engines due to its high specific impulse and lightweight. He also elaborated on its adoption in the aviation industry, noting that despite its potential, there were challenges, particularly in terms of energy density and volume. Dr. Emerson said, “Hydrogen has almost four times the energy content of kerosene by weight but takes up almost four times the volume.” Despite this, he acknowledged the need to decarbonize aviation and the potential for hydrogen to play a part in this process.
Dr. Emerson and Mr. Hill discussed the challenges of using hydrogen in aviation — the difficulty of storing liquid hydrogen due to its cryogenic requirements and the need for costly cryogenic systems and cryopumps. Despite this, the promise of decarbonizing an industry that has been difficult to decarbonize was seen as a motivating factor.
On the challenges of burning hydrogen in gas turbines, Dr. Emerson said, “The difficulties include hydrogen’s high flame speed and the need for careful control to avoid the formation of pollutants like oxides of nitrogen.” The discussion ended with the acknowledgment that current methods of low nitrogen oxide combustion, which involve pre-mixing fuel and oxidizer, might not be practical in aviation or in certain geographic locations.
Mr. Hill concluded, “The aviation application has been one of the most difficult areas to decarbonize up to this point due to low density of hydrogen compared to liquid fossil fuels. Additional challenges exist in controlling some of pollutant emissions, but it is highly encouraging to hear great progress is being made on hydrogen combustion.”
Dr. Emerson received his Ph. D. in Aerospace Engineering from Georgia Tech in 2013. Since then, Dr. Emerson has worked as a Research Engineer at the Ben T. Zinn Combustion Lab at Georgia Tech. His research portfolio includes projects on combustion instabilities, alternative fuels, and combustion system R&D with a core focus and motivation of cleaner combustion. Dr. Emerson’s research primarily consists of three core competencies, which are experimental combustion system development, combustor diagnostics, and combustion theory and modeling. Ben’s combustion system development work spans a wide variety of applications, from small lab-scale burners to combustor rigs that test full-scale gas turbine combustor hardware. His combustor diagnostics work encompasses the state-of-the-art optical diagnostic techniques for reacting flow field measurements and imaging and aims to implement those techniques in both laboratory-scale and large-scale rig tests. Finally, Dr. Emerson’s combustion theory and modeling work is geared towards analysis of experimental datasets, development of reduced-order engineering tools, and the development of a suite of hydrodynamic stability analysis tools. Together, these core competencies form the pillars of Ben’s research, which facilitates the design of cleaner-burning combustion systems.
Watch the full discussion on the NewHydrogen Podcast featuring Dr. Ben Emerson at https://newhydrogen.com/videos/ceo-podcast/dr-ben-emerson-georgia-tech.
For more information about NewHydrogen, please visit https://newhydrogen.com/.
NewHydrogen is developing ThermoLoop™ – a breakthrough technology that uses water and heat rather than electricity to produce the world’s lowest cost green hydrogen. Hydrogen is the cleanest and most abundant element in the universe, and we can’t live without it. Hydrogen is the key ingredient in making fertilizers needed to grow food for the world. It is also used for transportation, refining oil and making steel, glass, pharmaceuticals and more. Nearly all the hydrogen today is made from hydrocarbons like coal, oil, and natural gas, which are dirty and limited resources. Water, on the other hand, is an infinite and renewable worldwide resource.
Currently, the most common method of making green hydrogen is to split water into oxygen and hydrogen with an electrolyzer using green electricity produced from solar or wind. However, green electricity is and always will be very expensive. It currently accounts for 73% of the cost of green hydrogen. By using heat directly, we can skip the expensive process of making electricity, and fundamentally lower the cost of green hydrogen. Inexpensive heat can be obtained from concentrated solar, geothermal, nuclear reactors and industrial waste heat for use in our novel low-cost thermochemical water splitting process. Working with a world class research team at UC Santa Barbara, our goal is to help usher in the green hydrogen economy that Goldman Sachs estimated to have a future market value of $12 trillion.
Follow the money flow of climate, technology, and energy investments to uncover new opportunities and jobs.
Carbon Management Workshop February 19th The future of carbon capture is being built now. Be in the room where it happens. The Carbon Management Workshop is happening February 19 at Rice Universi...
Inside This Issue 💧 Avnos' Hybrid Direct Air Capture: The Future of Carbon Removal and Water Production ⚡ Hanwha and Baker Hughes Enter into Joint Development Agreement for Ammonia Gas Turbines 🏭 ...
Inside This Issue 📜 The Economic and Environmental Case for 45Q: An Open Letter to Congress 🤝 Syensqo and Ardent Announce Strategic Partnership to Accelerate Point Source Carbon Capture Innovation...
Landus and TalusAg Deliver First Local Green Ammonia Production in North America
Located in Boone, Iowa, the first-of-its-kind facility enables local green ammonia production that is reliable, cost-competitive and sustainable The innovative solution ensures resilience in t...
ADNOC's US Investments Moved to International Arm XRG
DUBAI, Feb 4 (Reuters) - Abu Dhabi National Oil Company (ADNOC)'s investments in the United States now sit within its new international investment arm XRG., ADNOC's CEO said on Tuesday, as the oil ...
CNL’s Clean Energy Siting Program introduces collaborative approach to siting emerging energy technologies and solutions at Canada’s national nuclear laboratories CHALK RIVER, Ontario, Feb. 04, 20...
SunHydrogen Achieves Highest Known Efficiency for a Large-Area Hydrogen Module
CORALVILLE, IA, Feb. 05, 2025 (GLOBE NEWSWIRE) -- SunHydrogen, Inc. (OTCQB: HYSR), the developer of a breakthrough technology to produce renewable hydrogen using sunlight and water, today shared st...
Follow the money flow of climate, technology, and energy investments to uncover new opportunities and jobs.